๐Ÿงช SciSim.co.uk

โšก Electrical Circuits Simulation

Battery
Bulb
Resistor
Ammeter
Switch
Current flow


Select a circuit template to begin. Use the switch to turn the circuit on/off. Adjust component values with the sliders.

๐Ÿ“Š Circuit Analysis

Total EMF
0.00 V
Total Resistance
0.00 ฮฉ
Total Current
0.000 A
Total Power
0.000 W

Component Details

ComponentResistance (ฮฉ)Voltage (V)Current (A)Power (W)
No circuit loaded

Investigate circuits

Select a circuit template, switch it on and compare the readings at different components. Current is the rate of charge flow; potential difference is energy transferred per unit charge. For an ohmic resistor at constant temperature, V = IR. Use the displayed values to check that relationship rather than relying on the animated charge markers alone.

  1. In a series circuit, compare current at each point and add the potential differences across components. How do they relate to the supply voltage?
  2. In a parallel circuit, compare the voltage across each branch. Add branch currents and compare the result with the supply current.
  3. Change a resistance while keeping the source the same. Predict what happens to current, then check the analysis panel.

Limits and real-world checks

The simulation treats wires and meters as ideal and holds component resistance fixed. Real cells have internal resistance, wires can warm up, and some components are non-ohmic. For a school practical, connect an ammeter in series and a voltmeter in parallel with the component being measured. Never connect an ammeter directly across a power supply.

Check your understanding: Why does adding a second parallel branch increase the total current drawn from an ideal fixed-voltage source?